128 Drive Backup\n\nDriveBackup\n\n\nDrive Backup.Document\nDriveBackup Document 129 Usage: "%s.exe" [/log] [/nochs] [/ebios] [/noebios] \n\n/log - use logging mode\n/nochs - use alternative geometry\n/ebios - force to use EBIOS\n/noebios - do not use EBIOS 130 \n/network - run in network mode 1501 Volume 1502 Type 1503 System 1504 Size 1505 Active 1506 Hidden 1507 Volume label 1508 Free 1509 Used 1511 Module 1512 Version 1513 Should be 1520 Primary 1521 Extended 1522 Logical 1523 , free 2110 Unformatted 2118 Invalid 2119 Other 2120 FAT16 2121 FAT12 2122 FAT32 2123 HPFS 2124 NTFS 2125 Linux Ext2 2126 Linux Swap 2127 Linux Swap2 2128 XENIX 2129 OS/2BM 2130 Compaq 2131 Novell 2132 UNIX 2133 FAT_VS 2134 NTFSVS 2135 BSD 2136 2137 [free] 2150 Disk 2151 Other 2152 Invalid 2153 Free 2154 Extended 2155 Unformatted 2225 Yes 2226 No 2257 The data of the processing partition will be corrupted!\nDo you really want to abort the operation? 2258 If you abort the current operation all image files will be corrupted, you will not be able to restore data from them.\nAre you sure you want to abort the operation? 2259 Abort operation? 2261 Disk copy 2262 There are bad blocks on the target partition! Continue? 2263 Partition size is too large for FAT16.\nThe partition will be converted to FAT32.\nOnly Windows 95 OSR2 / 98 can access FAT32.\nDo you want to continue? 2264 Invalid stat code 0x%08X. 2278 \nAre you sure? 2279 \nDo you really want to perform the operation? 2281 Please insert next disk 2285 Another application uses this partition or disk.\nClose all applications and try again. 2286 This program requires Windows NT or Windows2000 2287 There is not enough free space on target disk to create image of this partition! 2288 There is not enough free space on target disk to create image of this hard disk! 2290 This disk cannot be backed up onto itself! 2291 This partition cannot be backed up onto itself! 2292 This hard disk cannot be restored from itself! 2293 This partition cannot be restored from itself! 2298 This program requires Windows 95! 2300 The changes you have made will take effect only after your computer is restarted.\n\nDo you want to restart your computer now? 2302 Working ... 2303 Unable to initialize network layer. File DBNET.INI not found. \nPlease make sure it resides in the "Master" subdirectory of %s installation. 2304 Progress 2307 Please insert next disk with file %s 2308 Select next volume file for image 2309 Select next volume file for restore 2310 Connection to host "%1" lost or network delay is too small.\n\n(If slave program was reloaded, click "Abort", and repeat the action) 2317 %1 is already running. 2318 Some of the Paragon disk engine is already running. 2320 %s can not be launched from remote disk 2321 Remote disk 2322 Local disk 2323 Properties 2326 %s is scanning your hard disks. Please wait... 2327 %s is browsing the network. Please wait... 2330 Browsing the network... 2331 Rescanning local hard disks... 2332 with network support 2333 Rescanning local and network hard disks... 2334 Rescanning disks structure... 2340 A MultiCast group must contain more than one resource.\nTo connect to a single host use 'Map network disk' option from the 'Network' menu. 2341 Spaces are not allowed in group names. 2351 The slave "%1" does not support multicast. 2352 %s was unable to locate host "%1".\nPress 'Retry' to try to find this host again, 'Ignore' to ignore this error and continue, 'Exclude' to exclude this host from the list of %s's network resources. 2354 A disk error has occured at MultiCast client host "%1".\nPress 'Exclude' to exclude this host from the list of %s network resources and continue, 'Fail' to abort the operation. 2355 A network error has occured on MultiCast client host "%1".\nPress 'Retry' to try to find this host again, 'Fail' to abort the operation, 'Exclude' to exclude this host from the list of %s's network resources. 2356 Client host "%1" is a member of MultiCast group "%2".\nIt will be excluded from this group. 2357 MultiCast group "%1" will be deleted.\nReason: a MultiCast group must contain at least two hosts. 2358 The multicast group "%1" contains disks with different geometries.\nIt may cause compatibillity troubles in operations. 2359 %s was unable to connect to the host you specified because the maximum number of connections for your user license has been reached. 2360 %s was unable to connect to host %1.\nLicense limit reached. 2361 About 2362 Support query for 2363 %s\n version %lu.%lu 2364 It is recommended that you launch the Disk Administrator utility program from the Administrative Tools program group to register changes to the disk layout you have made.\nDo you want to launch this utility now? 2365 Settings 2366 Perform SID changing? 2367 %s cannot perform SID changing on a local disk in Windows mode.\nPlease use the MS-DOS version of SID Changer utility.\nPress 'Yes' to proceed, 'No' to abort the operation. 2369 not connected 2370 incompatible 2371 Disks in the MultiCast group have different layout 2372 Connecting... 2373 No free entries of requested size on this disk 2374 Unable to view not connected disk 2377 This 90-day evaluation version has expired. A commercial version of this product can be obtained from our Web-site, http://www.paragon-gmbh.com/db_ent.htm 2378 Evaluation version 2381 This program can be run only by a member of 'Administrators' group under Windows NT. 2382 (local host) 2383 The program failed to initialize properly. One of the required %s components is missing or corrupt. Please reinstall %s.\n\n\nCan't load 'Stub1.dll'. 2384 The program failed to initialize properly. One of the required %s components is missing or corrupt. Please reinstall %s.\n\n\nCan't find "%1" function in 'Stub1.dll'. 2385 The program failed to initialize properly. One of the required %s components is missing or corrupt. Please reinstall %s.\n\n\nError: "%1" occurs while running system function. 2386 Trial version expired! 2387 This function is not available in version Easy. This version is\navaialbale in full version - %s 2000. 2390 The version of client software installed on host %s is incompatible. 2391 The version of client software installed on host %s\nis incompatible with this Master and this host can't be connected.\nUpdate client software. 2394 This option will be changed only after restarting %s. 2395 The extreme surface test is not available for remote disks.\nNormal surface test will be used for them. 2396 %1\nThis file already exists.\nDo you really want to continue? 2397 You are using demo version of %s. To buy the full version click following link. 2400 from %d to %d 2401 Incorrect serial number 2403 Slave %s has active connection with another Master.\nThis old connection will be aborted if you decide to connect to the %s. This can break current operations and lead to data-loss.\n\nDo you want to connect to this slave now? 2450 Hard disk %d: I/O fault! 2451 Host %s: I/O fault! 2452 %d is not a valid entry. Please specify a value between 0 and 255 for this field. 2498 It contains an image of the host %s 2499 It contains an image of partition %u (logical %u) from the host %s 2500 It contains an image of partition %u (extended) from hard disk %u 2501 It contains an image of hard disk %u 2502 It contains an image of partition %u (logical %u) from hard disk %u 2503 It contains an image of partition %u (primary %u) from hard disk %u 2505 %d MB 2506 Remote disk (%s) 2507 Local disk (%s) 2508 You are deleting partition %s\nPlease enter the volume label to confirm deleting: 2509 You are overwriting partition %s\nPlease enter the volume label to confirm overwriting: 2510 Network disk %s has already been mapped. 2511 Are you sure you want to unmap network disk %s? 2512 Are you sure you want to delete MultiCast group %s? 2513 Group %s already exists.\nPlease specify a different name for the group you wish to create. 2514 Partition %c: 2515 Hard disk %d 2516 Image label is: %1 2517 This software requires ComCtl32.dll, version 4.70 or later. The curent version found on this system is %d.%d.%d. To get the latest version of ComCtl32.dll visit Microsoft's site at:\n\nhttp://www.microsoft.com/msdn/downloads/files/40comupd.htm 2518 %s Image (*.%1)|*.%1|All Files (*.*)|*.*|| 2519 HDD %d - %dM 2520 HDD %d 2521 Disk %d - %s 2522 Disk %d 2523 HDD %d (disconnected) 2530 b 2531 KB 2532 MB 2533 GB 2540 %s %s free 2600 Error occurs while working with comctl32.dll 2601 Warning: FAT16 partitions, if any, can be converted to FAT32.\n\nContinue? 2610 You are using DEMO version of '%s'\nThis operation is accessible only in full version of '%s' which can be bought here: 2611 This operation requires DOS part of Partition Manager. You are using DEMO version of Partition Manager, which does not contain DOS part of Partition Manager.\nYou can buy full version at this address: 2612 You are using DEMO version of '%s'\nThis operation is accessible only in full version of '%s'. 2620 Please insert bootable Rescue-Disk into drive A: 2621 The operation was successfully completed. 2622 Could not open the file %1. 2623 Could not read the file %1. 2626 This operation can be performed in DOS mode only. Press 'Continue' to reboot the computer automatically. 2627 The operation requires rebooting your computer. Press 'Continue' to reboot the computer automatically. 2628 The operation requires rebooting your computer with bootable diskette.\nPress 'Continue' to perform rebooting. 2629 Could not write the file %1. 2630 Could not open the file %1. 2631 Now you computer will be restarted. The pending operation will be automatically performed by %s.\n\nThen you should boot Windows again and start %s to see results. 2632 You should reboot your computer from bootable %1 diskette. The pending operation will be automatically performed in DOS. \n\nThen you should boot Windows again and start %s to see results. 2633 Now you computer will be restarted in DOS mode. The pending operation will be automatically performed by %1.\n\nThen you should boot Windows again and start %s to see results. 2634 Could not execute the file %1. 2635 Please insert %1 diskette into drive A:\n\nHint: You can create %1 diskette with Diskette Build Wizard. 2636 This is not %1 diskette. 2637 Cannot restart Windows NT. Check your Rights. 2638 The image file you are creating will be larger than the amount of free space on the destination. 2639 It will be splitted into several parts and you will be prompted to find a destination for subsequent parts. 2640 Destination partition 2641 Source partition 2642 Destination hard disk 2643 Source hard disk 2644 If it does not fit it will be splitted into several parts and you will be prompted to find a destination for subsequent parts. 2645 The amount of free space on the destination is less then the amount of data on the source disk/partition. Due to the compression the image may take less space. 2650 You must specify Time Zone! 2651 You must specify Code Page! 2699 ( sector %lu (0x%X) ) 2700 from %lu to %lu 2701 from 0x%X to 0x%X 2702 Select file contains data to restore 2703 Select file to backup sectors 2704 The sectors were restored successfully. 2705 The sectors was backuped successfully. 2706 Can't read sector(s) 2707 Can't write sector(s) 2709 Can't read file %s 2710 Can't write file %s 2711 Incorrect using of this function can lead to corrupted partition's!\nAre you sure? 2712 The size of the file to restore is not a multiple of sector size.\nDo you want to continue and restore one's possible? 2713 Select the number of sectors to backup 2714 Select the number of sectors to restore 2715 You have changed data!\nDo you want to cancel all the changes you have made? 2716 You are going to restore %lu sectors starting at %lu (0x%lx) sector.\nIncorrect using of this function can lead to corrupted partitions.\nDo you want to continue? 2717 Number of sectors to read/write is too big to handle it correctly! 2718 Invalid sectors range! 2719 Can't lock the partition! 2720 Can't unlock the partition! 2742 &Continue 2743 &Reboot 2744 Re&peat 2745 &Ok 2746 &Cancel 2747 &Fail 2748 &Abort 2749 &Retry 2750 &Ignore 2751 E&xclude 2752 Exclude &All 2753 &Use BroadCast 3000 3001 Partition size and/or position are out of range! 3002 Crosslinked partitions! 3003 There is not enough free disk space to create a partition! 3004 Unable to create the fifth primary partition! 3005 Invalid partition ID! 3006 You are trying to restore image of extended partition to logical\npartition. Please use image of primary or logical partition! 3007 No extended partition! 3008 Unsuccessful partition creation! 3009 Extended partition changes out of range! 3010 Extended partition already exists! 3016 FDISK structure corrupted 3017 Incorrect parameters (possibly it's internal error)! 3018 No logical disk for this partition! 3019 Unknown file system! 3020 Invalid partition data! 3021 Invalid cluster size! 3022 Unable to expand the partition to the specified size! 3023 New cluster is too small! 3024 Incorrect file system! Run ScanDisk. 3025 Not enough space for data in the new partition! 3026 Not enough memory! 3027 File I/O error! 3028 Partition parameters out of range! 3029 Invalid restart parameters! 3030 Boot area is too small! 3031 Root directory is too small! 3032 Boot area is corrupt - disk unusable! 3033 Incorrect directory structure! Run ScanDisk. 3034 Internal error! 3035 Cannot open image file. 3036 There is not enough free space on the target disk to create an image file. 3037 Invalid image file. 3038 The trial version of %s does not support this operation.\nContact Paragon http://www.paragon-gmbh.com to get full version. 3039 Invalid media type. 3040 File DBNET.INI not found. \nPlease make sure it resides in the "Master" subdirectory of %s installation. 3041 Unable to initialize network layer. Please make sure that you \n have TCP/IP protocol installed, configured and functioning. 3042 %s is unable to install BootManager Lite because BootManager or EZDrive system is already present in the system. 3043 The estimated size of CD Image file is greater than 640 Mb. 3044 The volume label you entered is incorrect. 3045 The disks, that constitute the MultiCast group, are incompatible. 3046 Invalid script parameters 3047 Operation denied 3048 Invalid SID Changer arguments 3049 Bad partition image size! 3050 This operation can be performed in DOS only. The reason is that destination partition has files opened by Windows and destination disk is not local and it is not visible in DOS (for instance, network disk, ZIP or JAZ disk). You need to set up neccessary drivers to access destination disk in DOS.\nHint: use Diskette Build Wizard to create %s DOS bootable disk containing all neccessary drivers. 3051 Disk too fragmented for resize. 3052 Unable to perform the operation on unknown or not connected slave. 3053 DOS client not found. 3054 You have entered an incorrect password. 3055 Installation error. 3056 Trial version expired. 3057 Partition is too small for FAT32. 3058 Partition is too large for FAT16. 3059 Can't restore disk image as partition. 3060 Can't restore partition image as disk. 3061 UNC filename can be created only under NT. 3062 Can't backup the partition/hard onto itself. 3063 There is a file or a directory that is larger than 4Gb. 3064 NTFS decompression error. 3065 Invalid code page file. 3066 Incompatible version components. 3067 Some sectors are filled incorrect. 3159 Disk I/O error 3160 Invalid operation code! 3161 %s is unable to complete the operation because Windows has performed a write to the source disk. Please make sure that all other open programs are closed and press "Retry" to instruct %s to restart the operation. If the problem persists, use the MS-DOS mode version of %s. 3162 The operation was not completed successfully.\nTarget partition or image file will contain invalid data. 3163 This operation can be performed in DOS only. The reason is that source partition has files opened by Windows and source disk is not local and it is not visible in DOS (for instance, network disk, ZIP or JAZ disk). You need to set up neccessary drivers to access destination disk in DOS.\nHint: use Diskette Build Wizard to create %s DOS bootable disk containing all neccessary drivers. 3164 %s is unable to complete the operation because Windows has performed a write to the source disk. Please make sure that all other open programs are closed and press "Retry" to instruct %s to restart the operation.\n\nIf the problem persists press "Reboot" to restart it in DOS or press "Cancel" to cancel the operation. 3165 %s is unable to complete the operation because Windows has performed a write to the source disk. Please make sure that all other open programs are closed and press "Retry" to instruct %s to restart the operation.\n\nIf the problem persists press "Cancel" and perform the operation in DOS.\n\nHint: You can use Diskette Build Wizard to build %s boot diskette with network support. 3166 Trial version restriction! 3167 This operation can not be performed under Windows (can't lock the source partition). You should boot from %s boot diskette that allows you to access a slave over network.\n\nHint: You can prepare this diskette with the help of Diskette Build Wizard. 3168 This operation can not be performed under Windows (can't lock the destination partition). You should boot from %s boot diskette that allows you to access a slave over network.\n\nHint: You can prepare this diskette with the help of Diskette Build Wizard. 3169 %s is unable to complete the operation because Windows has performed a write to the source disk. Please make sure that all other open programs are closed and press "Retry" to instruct %s to restart the operation. If the problem persists this operation can be performed in DOS only. The reason is that source partition has files opened by Windows and source disk is not local and it is not visible in DOS (for instance, network disk, ZIP or JAZ disk). You need to set up neccessary drivers to access destination disk in DOS.\nHint: use Diskette Build Wizard to create %s DOS bootable disk containing all neccessary drivers. 3200 Backup Wizard 3202 You are going to do: \n 3203 Create an image of partition %d on disk %d \n 3204 Create an image of disk %d \n 3205 Copy partition %d on disk %d \n to partition %d on disk %d \n 3206 Copy disk %d to disk %d \n 3207 Restore partition %d on disk %d from image \n 3208 Restore disk %d from image \n 3210 \nFeatures: \n 3211 +Destination file: %s \n 3212 +Image size: %.2lf MB \n 3213 +Source file: %s \n 3214 +Target partition size: %lu MB \n 3215 +Without autoresize \n 3216 +With autoresize \n 3217 +Without autoresize \n 3218 +Align at the beginning \n 3219 +Align at the ending \n 3220 Select hard disk you want to copy to or upgrade. 3221 Select hard disk you want to copy. 3222 Select hard disk you want to restore to. 3223 Select hard disk you want to backup. 3225 Select the partition you want to backup. 3226 Select the partition you want to restore to. 3227 Select the partition you want to copy to. 3228 Select the partition you want to copy. 3321 Create an image of partition 3322 Create an image of disk 3323 Select image to restore partition 3324 Select image to restore disk 3325 Select image to restore 3326 Specify image file to create 3350 If this partition is bootable, reinit your LILO code. 3351 Unlock key is invalid. 3352 You are about to begin operation of erasing data. Are you sure? 3353 Serial key: 3354 Wipe/check 3355 Wipe/check free space 3400 &Partition 3401 &Disk 4265 This is the extended partition! All logical partitions inside it will be deleted!\n 4266 This is the extended partition! All logical partitions inside it will be hidden!\n 4267 You are destroying a bootable partition!\n 4268 Hard disk will be not bootable at all!\n 4269 You will have no accessible partitions.\n 4270 You will have more than one primary partition.\n 4271 You will have more than one bootable partition.\n 4272 FAT32 is accessible only under Windows 95 OSR2+, Windows98 or Windows2000!\n 4273 HPFS is accessible only under OS/2!\n 4274 Can't create the 5'th primary partition. Source partition will be deleted!\n 4275 New partition will be hidden.\n 4276 Target disk is too small! Not all partitions will be restored! Proceed?\n 4277 Target disk is not empty. All partitions on it will be deleted! Proceed? 4278 Target partition is not free! It's current data will be lost! 4282 All the old data will be lost!\n 4283 All the data up to the end of tape will be lost!\n 4284 Can't perform SID changing on local disk in Win mode.\nUse DOS SID changer utillity.\n 4285 There are lost clusters on this partition.\nAll these clusters will be removed during resize operation!\n 4286 You are destroying the partition with current OS!\n 4287 NTFS is Windows NT only accessible!\n 4288 This file system is Linux only accessible!\n 5000 Hide docked window 5001 Expand docked window 5002 Contract docked window 5060 Trial version is expired. 5061 You work with the trial version of the program.\nThis version expires in %i days. 5062 You work with the trial version of the program.\nThis version expires today. 10055 Slave-config properties 10056 Slave-config name 10058 Assigned to 10059 New SlaveConfig 10060 Not assigned 10061 Error occurs while pack unpack operation 14006 The following postconfig(s)\n%1\n\nwill be deleteted. 22771 Install this config on a slave 22772 Install on the slave assigned to 22773 Sort items by state 22774 Sorts items by scheduling time 22775 Delete selected configuration(s) from the list 22778 Rename this configuration 22779 Display properties for this configuration 22780 Duplicate this configuration 22781 Create a new configuration 22782 Retrieve configuration from a slave 22791 Sort items by assigment 32771 Copy the selected hard disk to disk\nCopy disk to disk (Ctrl+C) 32772 Create an image of the selected hard disk\nCreate an image (Ctrl+B) 32773 Restore the selected hard disk from image file\nRestore from image (Ctrl+R) 32774 Copy the selected partition to partition\nCopy partition (Alt+C) 32775 Create an image of the selected partition\nCreate an image (Alt+B) 32776 Restore the selected partition from image\nRestore from image (Alt+R) 32777 Create a partition\nCreate (Alt+N) 32778 Format partition\nFormat (Alt+F) 32779 Resize partition\nResize (Alt+Z) 32780 Delete the selected partition\nDelete (Alt+D) 32781 Hides the selected partition\nHide 32782 Makes the selected partition visible to the system\nUnhide 32783 Makes the selected partition active\nActivate 32784 Makes the selected partition not active\nDeactivate 32785 Display the properties of the selected partition\nProperties (Alt+Enter) 32786 Refreshe network connections\nRefresh 32787 Map a network hard disks\nMap network disk 32788 Unmap the selected network hard disk\nUnmap network disk 32789 Create a new MultiCast group\nNew group 32790 Display Edit MultiCast group dialog\nEdit group 32791 Delete a MultiCast group\nDelete group 32792 Displays settings dialog\nSettings 32793 Displays help contents 32794 Connects a disconnected network resource 32795 Show or hide the JobView\nToggle JobView 32797 Displays Windows GUI help contents 32798 Update product from Internet 32799 Show or hide the Slave-Config View\nToggle Slave-Config View 32800 Run Backup Wizard\nBackup Wizard 32802 Move the selected partition\nMove partition (Alt+M) 32803 Convert the selected partition\nConvert 32804 Show accessibility for the selected partition\nAccessibility 32805 Uncheck this option to disable 'Close all programs...' warning at startup 32806 Modify the selected partition\nModify partition 32808 Wipe the selected hard disk\nWipe (Ctrl+W) 32809 Wipe the selected partition\nWipe (Alt+W) 32810 Clear free space of the selected partition\nClear free space 32811 Mount the selected partition\nMount 32812 Display the sector(s) of the selected partition\nView sectors (Alt+V) 32813 Display the sector(s) of the selected disk\nView sectors (Ctrl+V) 32814 Display the information about hard disk\nHard disk information (Ctrl+I) 57345 Ready 57600 Copy one hard disk to another...\nCopy... 57602 Close the active document\nClose 57603 Save the active document\nSave 57604 Save the active document with a new name\nSave As 57616 Open this document 57617 Open this document 57618 Open this document 57619 Open this document 57620 Open this document 57621 Open this document 57622 Open this document 57623 Open this document 57624 Open this document 57625 Open this document 57626 Open this document 57627 Open this document 57628 Open this document 57629 Open this document 57630 Open this document 57631 Open this document 57632 Erase the selection\nErase 57633 Erase everything\nErase All 57634 Copy the selection and put it on the Clipboard\nCopy 57635 Cut the selection and put it on the Clipboard\nCut 57636 Find the specified text\nFind 57637 Insert Clipboard contents\nPaste 57640 Repeat the last action\nRepeat 57641 Replace specific text with different text\nReplace 57642 Select the entire document\nSelect All 57643 Undo the last action\nUndo 57644 Redo the previously undone action\nRedo 57653 Split the active window into panes\nSplit 57664 Display program information, version number and copyright\nAbout 57665 Quit the application\nExit 57680 Switch to the next window pane\nNext Pane 57681 Switch back to the previous window pane\nPrevious Pane 59136 EXT 59137 CAP 59138 NUM 59139 SCRL 59140 OVR 59141 REC 59392 Show or hide the toolbar\nToggle ToolBar 59393 Show or hide the status bar\nToggle StatusBar 59397 Arrange the icons automatically 59408 Displays items by using small icons 59409 Displays items by using large icons 59410 Displays items in a list 59411 Displays information about each item in the window 59413 Sorts items alphabetically by name 59414 Installation of slave config was successfull. 59415 Retrieve slave config was successfull. 59420 Name AssingnTo is incorrect. 59421 Information in SlaveCfg is incorrect.\nIt can't be displayed! 61184 Change the window size 61185 Change the window position 61186 Reduce the window to an icon 61187 Enlarge the window to full size 61188 Switch to the next document window 61189 Switch to the previous document window 61190 Close the active window and prompts to save the documents 61202 Restore the window to normal size 61203 Activate Task List 61440 Open 61441 Save As 61442 All Files (*.*) 61443 Untitled 61446 an unnamed file 61457 &Hide 61472 No error message is available. 61473 An unsupported operation was attempted. 61474 A required resource was unavailable. 61475 Out of memory. 61476 An unknown error has occurred. 61696 Invalid filename. 61697 Failed to open document. 61698 Failed to save document. 61699 Save changes to %1? 61700 Failed to create empty document. 61701 The file is too large to open. 61702 Could not start print job. 61703 Failed to launch help. 61704 Internal application error. 61705 Command failed. 61706 Insufficient memory to perform operation. 61707 System registry entries have been removed and the INI file (if any) was deleted. 61708 Not all of the system registry entries (or INI file) were removed. 61709 This program requires the file %s, which was not found on this system. 61710 This program is linked to the missing export %s in the file %s. This machine may have an incompatible version of %s. 61712 Please enter an integer. 61713 Please enter a number. 61714 Please enter an integer between %1 and %2. 61715 Please enter a number between %1 and %2. 61716 Please enter no more than %1 characters. 61717 Please select a button. 61718 Please enter an integer between 0 and 255. 61719 Please enter a positive integer. 61720 Please enter a date and/or time. 61721 Please enter a currency. 61728 Unexpected file format. 61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given. 61730 Destination disk drive is full. 61731 Unable to read from %1, it is opened by someone else. 61732 Unable to write to %1, it is read-only or opened by someone else. 61733 An unexpected error occurred while reading %1. 61734 An unexpected error occurred while writing %1. 61836 Unable to read write-only property. 61837 Unable to write read-only property. 61840 Unable to load mail system support. 61841 Mail system DLL is invalid. 61842 Send Mail failed to send message. 61856 No error occurred. 61857 An unknown error occurred while accessing %1. 61858 %1 was not found. 61859 %1 contains an invalid path. 61860 %1 could not be opened because there are too many open files. 61861 Access to %1 was denied. 61862 An invalid file handle was associated with %1. 61863 %1 could not be removed because it is the current directory. 61864 %1 could not be created because the directory is full. 61865 Seek failed on %1 61866 A hardware I/O error was reported while accessing %1. 61867 A sharing violation occurred while accessing %1. 61868 A locking violation occurred while accessing %1. 61869 Disk full while accessing %1. 61870 An attempt was made to access %1 past its end. 61872 No error occurred. 61873 An unknown error occurred while accessing %1. 61874 An attempt was made to write to the reading %1. 61875 An attempt was made to access %1 past its end. 61876 An attempt was made to read from the writing %1. 61877 %1 has a bad format. 61878 %1 contained an unexpected object. 61879 %1 contains an incorrect schema. 61888 pixels